The illusion has been designed to look as though the building in London's Covent Garden is floating. Image: Jeff Moore
Taking residence on the East Piazza at Covent Garden in London is a new and unique artwork that sees a section of the building magically levitate – with one of the key structural elements of the illusion provided by Brett Martin Plastic Sheets.
Modelled on the original architecture of the 184 year old market building, the artwork, ‘Take my lightning but don’t steal my thunder’, has been designed by London artist Alex Chinneck and built by a 100-strong team who have conjured up the illusion that a 40-foot-long building has broken from its stone base and then floated 10 feet into the air with “bewildering weightlessness”.
With the installment based around both weight and aesthetics, the building had to be as light as possible but still look like a stone and brick building. Built from a steel and timber frame, the walls were created using Brett Martin’s Marlon ST Longlife, a structurally strong, lightweight multiwall polycarbonate sheet. Polystyrene was then intricately carved using robotic hot-wire cutters, and glued to the polycarbonate sheet prior to the application of the plaster and granite sand finish to match the existing market building.
“As a young sculptor ambition is a necessity for the evolution of my practise and growth of my career. My ideas however are always considerably beyond my means and capacity to produce them and limited resources are forever an obstacle,” said Chinneck. “With the incredibly generous support of Brett Martin it has been possible to realise my largest and most challenging project to date, a hovering building on Covent Garden Piazza. I think it's fantastic that Brett Martin have chosen to sponsor, champion and celebrate this project and the art world would be a more exciting place if more companies followed their lead.”
Northern-Ireland based Brett Martin says the 10mm Twinwall Marlon ST Longlife was chosen for the artwork for its “exceptional strength and rigidity”. Ordinarily used in roofing and glazing applications, the multiwall structure of Marlon ST Longlife provides a very high stiffness-to-weight ratio. The sheet is strong yet light in weight, a key consideration for this architectural illusion.
Following a pre-fit, the artwork was then shipped by 10 arctic trucks and installed over four days at the Piazza.