Staubli Connectors Division
Stäubli Group acquires Roman Seliger in expansion of connectors portfolio
Stäubli Group has acquired RS Roman Seliger Armaturenfabrik GmbH, a specialist in the development of standard and safety dry-disconnect couplings, for an undisclosed sum. Read more
Injection moulds usually need to be connected to a range of circuits e.g. water, hydraulics and electrics.
Feature: How to achieve a quick payback on your productivity investments
In the first of an exclusive two-part series, Craig Forrester of Stäubli Connectors UK talks to BP&R about the productivity gains that can be achieved when plastic processors invest in more modest items that can often be overlooked. Read more
Your journey to SMED begins at Interplas
Stäubli is showcasing a demonstration cell at Interplas to explain just how automation solutions for injection moulding can open new levels of productivity, process reliability and flexibility. Read more
Productivity in Practice: Small changes for the biggest reward
Productivity, and ways for the UK manufacturing industry to increase its levels to remain competitive, is a topic of increasing importance. But how can the plastics industry benefit and can you increase productivity without major investment? Read more
19 Jun 2017 11:49 Guest Blog
Productivity in Practice: Small changes for the biggest reward
Productivity, and ways for the UK manufacturing industry to increase its levels to remain competitive, is a topic of increasing importance. But how can the plastics industry benefit and can you increase productivity without major investment? Read more
Asking the boss: How a day out of the office could reap financial rewards
Can your boss afford not to allow you to visit Interplas to discover the latest cost saving innovations? This is the question posed by Craig Forrester of Staubli Connectors Division ahead of Interplas. Read more
Stäubli launches new electrical connectors for IMMs
Stäubli has launched a new range of electrical connectors specifically designed for use on injection moulding machines for temperature control, measurements and operational controls. Read more
Talking technical - Part 1: Quick Release Mould Connectors
In the first part of BP&R's exclusive series, Craig Forrester reviews some of the techniques that can bring significant improvements to productivity in an injection moulding shop. In this instalment, the focus is quick release mould connections. Read more
Talking technical - Part 2: Quick Mould Clamping Systems
In the second instalment of our series of articles looking at improving productivity in injection moulding, Craig Forrester addresses how investing in Quick Mould Clamping Systems could help manufacturers enhance both profitability and productivity. Read more
Talking technical - Part 3: Speed up changeovers with a mould transfer system
In the third instalment of our series of articles looking at improving productivity in injection moulding, Craig Forrester of Stäubli Connectors UK, looks at mould transfer and loading. Read more
New clean-break coupling is much easier to connect
Stäubli has introduced a new range of clean break, flat face connectors that it says are suitable for all fluids and fully compatible with its SCB range, but much easier to connect. Read more
Stäubli offers ‘hands-on’ connection with new UK demonstrator facility
Stäubli, recently opened the doors to its new facility in Telford, UK, where it demonstrated a number of techniques for efficient, safe and innovative manufacturing in plastics. Here, Leanne Taylor reports from inside the doors. Read more
Secure high temperature connections for moulding and casting launched
Stäubli Connectors has introduced a range of secure high temperature couplings that ensure the safe control of fluids, in response to manufacturers increasingly using higher temperatures in their moulding and casting processes. Read more
Calling all plastic moulders looking to maximise productivity
Stäubli Connectors Division is presenting its full range of products for the plastics sector at Interplas, and has revealed it will launch its latest connector series (HTI and HTM) for the safe control of temperature circuits up to 300°C. Read more
Interview: Disconnect in complete safety
Many accidents are caused in factories and workshops by hose whip, which occurs when disconnecting compressed air lines still under pressure. Craig Forrester, Stäubli Connectors UK Manager, outlines how plastics companies can eliminate this danger. Read more
Locking systems are key to connectors’ performance
Stäubli, specialists in connection solutions, have introduced new locking systems across a range of their multi coupling systems specifically designed for the plastics market. Read more
Stäubli introduces temperature control manifold for injection moulding
Stäubli, a company specialising in high integrity connection solutions, has introduced a temperature control manifold for injection moulding applications in the plastics sector, which it says simplifies mould connections and brings added flexibility. Read more
Speed up changeovers and improve handling with a mould transfer system
A key element in the operation of an efficient injection moulding shop is the ease and speed of changing moulds. Here, experts at Stäubli UK, look at how transfer tables can help with efficiency and productivity. Read more
New mould temperature control connectors said to eliminate spillage
Stäubli has introduced a new range of compact multi-connectors for mould temperature control circuits that it says totally eliminates spillage and prevents any pollutants entering the system on connection or disconnection. Read more
Quick mould change and a new robot to be presented at K
At this year’s K Show, Stäubli’s Connectors and Robotics Divisions will jointly present a range of products specifically designed for the plastics industry to improve productivity and production flexibility. Read more
